6.
A message appears on screen to inform you that a RAID 1 array
created with Quick Init requires you to run a Verify W/FIX on the
drives for consistency. Press any key to continue.
The screen returns to the main menu.
M a n a g e A r r a y s
M a n a g e A r r a y s
7.
Select M a n a g e A r r a y s
M a n a g e A r r a y s to display the array(s), then press <Enter>
M a n a g e A r r a y s
to view the array properties.
8.
To exit the utility, press <Esc>, highlight Y e s
5 - 5 8
5 - 5 8
5 - 5 8
5 - 5 8
5 - 5 8
Y e s
Y e s, then press <Enter>.
Y e s
Y e s
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n