Creating A Raid 0 Set (Striped) - Asus Motherboard NCLV-D2 Series Product Manual

5.5.2 5.5.2 5.5.2

Creating a RAID 0 set (Striped)

Creating a RAID 0 set (Striped) Creating a RAID 0 set (Striped)
5.5.2 5.5.2 Creating a RAID 0 set (Striped) Creating a RAID 0 set (Striped)
To create a RAID 0 set:
1. From the Adaptec RAID Configuration Utility initial menu, highlight
A r r a y C o n f i g u r a t i o n U t i l i t y A r r a y C o n f i g u r a t i o n U t i l i t y
A r r a y C o n f i g u r a t i o n U t i l i t y, then press <Enter>. A r r a y C o n f i g u r a t i o n U t i l i t y A r r a y C o n f i g u r a t i o n U t i l i t y
2. From the Main Menu, select C r e a t e A r r a y
3. Select the first drive you want to add to the array, then press
<Insert>. The selected drive appears in the S e l e c t e d D r i v e s
section.
A RAID 0 set requires two identical hard disk drives.
4. When all the drives required for a RAID 0 set appear in the S e l e c t e d
D r i v e s D r i v e s
D r i v e s field, press <Enter>. D r i v e s D r i v e s
5 - 5 0 5 - 5 0
5 - 5 0 5 - 5 0 5 - 5 0
C r e a t e A r r a y C r e a t e A r r a y, then press <Enter>. C r e a t e A r r a y
C r e a t e A r r a y
S e l e c t e d D r i v e s S e l e c t e d D r i v e s S e l e c t e d D r i v e s S e l e c t e d D r i v e s
C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n
S e l e c t e d S e l e c t e d S e l e c t e d S e l e c t e d