Asus Motherboard NCLV-D2 Series Product Manual page 33

2. Use a Phillips screwdriver to
tighten the four heatsink screws
in a diagonal sequence.
3. Connect the fan cable to the
4-pin connector labeled
CPU_FAN1.
Do not forget to connect the
CPU fan connector! Hardware
monitoring errors may occur if
you fail to plug this connector.
4. Repeat steps 1 to 3 to install
the other heatsink if you have
installed a second CPU, then
connect the fan cable to the
4-pin connector labeled
CPU_FAN2.
The heatsinks appear as shown
when installed.
C P U _ F A N 2 c o n n e c t o r C P U _ F A N 2 c o n n e c t o r C P U _ F A N 2 c o n n e c t o r C P U _ F A N 2 c o n n e c t o r C P U _ F A N 2 c o n n e c t o r
A S U S N C L V - D 2 S e r i e s A S U S N C L V - D 2 S e r i e s
A S U S N C L V - D 2 S e r i e s A S U S N C L V - D 2 S e r i e s A S U S N C L V - D 2 S e r i e s
C P U _ F A N 1 C P U _ F A N 1 C P U _ F A N 1 C P U _ F A N 1 C P U _ F A N 1
c o n n e c t o r c o n n e c t o r c o n n e c t o r c o n n e c t o r c o n n e c t o r
2 - 1 3 2 - 1 3
2 - 1 3 2 - 1 3 2 - 1 3