Asus Motherboard NCLV-D2 Series Product Manual page 155

9. Move the cursor to [ D o n e ]
10. A message appears on screen when a member drive has a partition or
boot block. Press <Y> to proceed, or press <N> to abort.
All partition table, boot block, and/or data in member drives will be
erased when you select Y e s
11. After you have created the RAID 0 set, the utility main menu appears.
M a n a g e A r r a y s M a n a g e A r r a y s
Select M a n a g e A r r a y s M a n a g e A r r a y s to display the array, then press <Enter> to M a n a g e A r r a y s
view the array properties.
12. To exit the utility, press <Esc>, highlight Y e s
A S U S N C L V - D 2 S e r i e s A S U S N C L V - D 2 S e r i e s
A S U S N C L V - D 2 S e r i e s A S U S N C L V - D 2 S e r i e s A S U S N C L V - D 2 S e r i e s
[ D o n e ], then press <Enter>. [ D o n e ] [ D o n e ]
[ D o n e ]
Y e s. Y e s Y e s Y e s
Y e s Y e s
Y e s, then press <Enter>. Y e s
5 - 5 3 5 - 5 3
5 - 5 3 5 - 5 3 5 - 5 3