Asus Motherboard NCLV-D2 Series Product Manual page 118

5. When initialization is completed, press <Esc>.
Using the Objects command Using the Objects command Using the Objects command Using the Objects command Using the Objects command
To initialize the logical drives using the O b j e c t s
1. From the Management Menu, highlight O b j e c t s
5 - 1 6 5 - 1 6
5 - 1 6 5 - 1 6 5 - 1 6
O b j e c t s O b j e c t s
O b j e c t s command: O b j e c t s
O b j e c t s O b j e c t s
O b j e c t s, then press <Enter>. O b j e c t s
C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n