SMART Monitoring [Auto]
This field allows you to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis
and Reporting Technology) system that utilizes internal hard disk drive monitoring
technology. This parameter is normally disabled because the resources used in the
SMART monitoring feature may decrease system performance. Configuration
options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Disabled]
This field enables or disables the 32Bit data transfer mode. Configuration options:
[Enabled] [Disabled]
2.3.2 IDE Configuration
This option displays detailed information about IDE configurations
OnBoard PCI IDE Operate Mode [Legacy Mode]
Configuration options: [Legacy Mode] [Native Mode]
Enhanced Mode Support On [S-ATA]
This field allows you to set the Serial ATA, Parallel ATA or both as native mode.
Configuration options: [P-ATA+S-ATA] [S-ATA] [P-ATA]]
IDE Detect Time Out (Sec) [35]
This field allows you to select the time out value for detecting ATA/ATAPI device(s).
Configuration options: [Primary] [Secondary] [Both]
2-8
Chapter 2: BIOS information