Table of Contents
Advertisement
6.
Select the stripe size from the
menu, then press <Enter>.
For server systems, we recommend that you use a lower array block size.
For multimedia computer systems used mainly for audio and video editing,
we recommend a higher array block size for optimum performance.
7.
When prompted, use the keyboard to assign a name for the RAID 10
set, then press <Enter>.
8.
If you want to make the array
bootable, select Y e s
menu, then press <Enter>.
9.
When prompted to create the
RAID 10 set, select <Yes>, then
press <Enter>.
The utility erases all data from the selected hard disk drives. Make sure
to backup all important data before creating a RAID set.
A B u i l d C o m p l e t e
B u i l d C o m p l e t e
B u i l d C o m p l e t e
B u i l d C o m p l e t e message
B u i l d C o m p l e t e
appears to indicate that you have
successfully created the RAID 10
set.
5 - 3 8
5 - 3 8
5 - 3 8
5 - 3 8
5 - 3 8
Y e s
Y e s from the
Y e s
Y e s
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
Advertisement
Table of Contents
