Asus Motherboard NCLV-D2 Series Product Manual page 159

4. Move the cursor to the C r e a t e R A I D v i a
from the menu, then press <Enter>. Refer to the RAID creation
options below.
B u i l d B u i l d B u i l d - Select this option when one of the drives has data that
B u i l d B u i l d
C l e a r C l e a r
C l e a r C l e a r C l e a r - Select this option to erase all existing data on new or
Q u i c k I n i t - - - - - This is the fastest way to create a RAID 1 set. Use this Q u i c k I n i t Q u i c k I n i t
Q u i c k I n i t Q u i c k I n i t
5. When you have finished setting the array properties, move the cursor
[ D o n e ] [ D o n e ]
to [ D o n e ] [ D o n e ], then press <Enter> to create the RAID 1 set. [ D o n e ]
A S U S N C L V - D 2 S e r i e s A S U S N C L V - D 2 S e r i e s
A S U S N C L V - D 2 S e r i e s A S U S N C L V - D 2 S e r i e s A S U S N C L V - D 2 S e r i e s
C r e a t e R A I D v i a C r e a t e R A I D v i a option, select Q u i c k I n i t C r e a t e R A I D v i a
C r e a t e R A I D v i a
you want to preserve. When you create a RAID 1 set
using B u i l d B u i l d, you are prompted to select the source B u i l d B u i l d B u i l d
drive. The contents of the source drive are preserved,
but you lose all data on new drive(s).
old drives that you want to include in the RAID 1 set.
option when using new drives.
Q u i c k I n i t Q u i c k I n i t Q u i c k I n i t
Q u i c k I n i t
5 - 5 7 5 - 5 7
5 - 5 7 5 - 5 7 5 - 5 7