Changing The Base Station Name; Repeater Support; Resetting The Base Station To The Factory Setting - Siemens Gigaset S100 User Manual

Setting the base station

Changing the base station name

The name "
Base station 1" to "Base station 4"
name of your base station.
[______________________________________________]
H/Set Settings
[______________________________________________] Select Base
[RRRRRRRRRRRRRRRRRRRRRR]
Edit
[RRRRRRRRRRRRRRRRRRRRRR]
Save
The name of the base station is handset specific, i.e. the base station
i
receives the name assigned to it from the corresponding handset. The
same base station can have different names on different handsets.

Repeater support

You can use a repeater to boost the range and reception of your base station; it has to
be registered. Before you can use it, you have to activate the repeater function. This will
terminate any calls being made.
[______________________________________________]
Base Settings
[______________________________________________]
Add. Features
[______________________________________________]
Repeater Mode
[RRRRRRRRRR]
Yes

Resetting the base station to the factory setting

If you reset the base station, this will not affect the system PIN and handsets will remain
registered.
[______________________________________________]
Base Settings
[______________________________________________]
Base Reset
OK
[RRRRRRRRRR]
Yes
106
is assigned automatically. You can change the
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the base station and press the display key.
Enter the new name (max. 16 characters) (for enter-
ing letters and characters see page 117).
Press the display key to save the setting.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Press the display key to confirm the prompt.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter the system PIN (factory setting: 0000) and con-
firm.
Press the display key to confirm the prompt.