Saving The Prefix (Apl); Setting Pauses - Siemens Gigaset S100 User Manual

Saving the prefix (APL)

Prerequisite: Your PABX requires a prefix, e. g. "0", before the telephone numbers for
external calls.
[______________________________________________]
Base Settings
[______________________________________________]
Add. Features
[______________________________________________]
Access Code
à
[______________________________________________]
Save Entry
The following applies if a prefix is saved:
For emergency numbers, SMS service centre numbers and dialling from the caller
N
list or message list (only S 150) the prefix is automatically inserted.
For telephone numbers from the directory or network access list, you have to add
N
the prefix yourself.
If you use the telephone number from the directory when sending an SMS, you have
N
to delete the prefix.
You can delete a prefix using X. To insert a pause, press
N
, s Insert Recall
à
or
OK

Setting pauses

Pause after line seizure
You can use this function to set the length of the pause that is automatically inserted
between pressing the talk key c and transmitting the telephone number (factory set-
ting: 3 seconds).
OK
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter or change the prefix (up to 3 digits) and press
the display key.
Confirm. The entry is saved.
OK
Hold down (return to idle).
.
OK
Open the menu.
Press key.
Enter the pause length (1 = 1 second; 2 = 3 seconds;
3 = 7 seconds; 4 = 2.5 seconds) and confirm.
Connecting the base station to a PABX
à
, s Insert Pause
109