Operating The Answering Machine By Voice Command; Recording Voice Commands - Siemens Gigaset S100 User Manual

Using the S 150 base station answering machine
Recording a call
You can use the answering machine to record an external call. The recording time
depends on what recording quality (page 79) is set and the available memory.
Prerequisite: You are conducting an external call.
either ...
[______________________________________________]
Two Way Record
[______________________________________________]
Mailbox 2
The recording will indicated by an advisory text on the display and it will be included as
a new message in the list.
To end the recording, press the display key
i
Inform your partner on the telephone that you are recording the call.

Operating the answering machine by voice command

You can use voice commands to control message playback. Four different users can save
their pronunciation of the commands Delete, Continue and Go Back for voice
recognition. The user has to say all three voice patterns in the specified order.

Recording voice commands

Record your voice pattern in quiet surroundings.
[______________________________________________]
Voice Mail
[______________________________________________]
Voice Prompts
[______________________________________________]
Record Command
[______________________________________________]
User 2
OK
The loudspeaker switches itself on. After the prompt to say the first command you will
hear the ready tone (short tone). Now say the command Delete. After the prompt to
repeat the command you will hear the ready tone again. Repeat Delete.
You will then be prompted to say the second command Forward. Proceed as with the
command Delete. Thirdly say the command Back.
i
If the memory is full, no more voice patterns can be recorded.
74
Open the menu.
To start recording:
Select the menu item and confirm.
OK
If several mailboxes are activated:
Select the menu item and confirm.
OK
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Confirm.
OK
Select the user and confirm.
OK
Confirm.
.
End