Using A Handset As A Room Monitor - Siemens Gigaset S100 User Manual

Operating several handsets
Playing/deleting direct inward dialling announcement (only S 150)
[______________________________________________]
Base Settings
[______________________________________________]
Call Director
either ...
[______________________________________________]
Play Announce
or ...
[______________________________________________]
Del Announce
[RRRRRRRRRR]
Yes
During playback you can activate the loudspeaker using the d key.
N
i
While you are listening to the announcement, you can press the
N
display key
Picking up a call (only S 150)
If a call is not accepted while direct inward dialling is activated, you can pick it up from
a different handset by pressing the talk key c. The call is indicated on this handset by
the flashing LED.

Using a handset as a room monitor

This function calls a previously stored internal or external number if a certain defined
noise level is reached (if the baby cries). When you answer the call, you will hear the
noise in the baby's room. Even after you hang up the room monitor function on the
handset remains active.
The distance between the handset and the baby should be between 1 and 2 metres.
The microphone must be facing the baby.
If the room monitor function is activated, incoming calls on that handset will be sig-
nalled without the ringer and shown only on the display. The display and keypad are
not illuminated.
When entering an external telephone number, make sure:
The handset in the baby's room is not barred for outgoing calls.
N
The number to which the alarm calls is sent is not blocked by an activated answering
N
machine.
Before leaving, you should check the settings for the room monitor,
W
e.g. sensitivity and connection.
90
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Playing back the announcement:
Select the menu item and confirm.
OK
Deleting the announcement:
Select the menu item and confirm.
OK
Press the display key to confirm the prompt.
Hold down (return to idle).
to re-record it.
New