Displaying Available Memory; Displaying Lists Via The Message Key - Siemens Gigaset S100 User Manual

Using the directory and other lists

Displaying available memory

The memory is shared by the directory, the speed dial list (page 23) and the email direc-
tory (page 36). The available memory of all lists is displayed.
[______________________________________________]
Available Memory

Displaying lists via the message key

You can user the message key f to open the following lists:
1. SMS list (if several mailboxes have been set up, these are listed),
2. Message list or mailbox 1, mailbox 2, mailbox 3 (page 65) (only S 150),
3. Messages on the network mailbox (if your telephone company supports this func-
tion and it has been defined for fast access, page 81),
4. Caller list.
As soon as a new entry (SMS, message on the integrated answering machine
(only S 150) and/or calls) appears in one or more lists, the f key flashes and you hear
a signal tone. If you press the flashing f key but leave the menu before opening any of
the lists, the f key will continue to flash.
If you press the flashing f key and open one of the lists, the key will not flash after you
leave the list even if other lists still contain new entries. If there is at least one new
entry, you can reset the f key to "flashing", i.e. to re-activate it. Then other members
of your family or colleagues, for example, will know that there are new messages wait-
ing for them.
If you press the f key, you will see the following lists:
If only one of the lists has new entries, the first new entry of this list will be dis-
N
played; if it is an entry in a personal mailbox, the corresponding list will be displayed.
If several lists have new entries, they will be displayed.
N
If none of the lists has any new messages, all the lists are displayed.
N
If calls are saved in the network mailbox, you will receive a message to that effect
N
depending on the settings made (see the network mailbox operating instructions).
Activating/deactivating "flashing" message key
Prerequisite: There is still at least one new entry in one of the lists.
[______________________________________________]
Mark as new
The key will continue to flash until it is pressed again and a list or list entry is opened.
38
Open the directory.
Select any entry and open the menu.
Select the menu item and confirm.
OK
Hold down (return to idle).
Open the caller list.
Select the menu item and confirm.
OK
Hold down (return to idle).