Siemens Gigaset S100 User Manual page 67

How to respond to error messages
Error message
SMS messages cannot be sent. The "calling line identification"
The SMS you receive is incom-
plete.
You no longer receive any SMS
messages.
You do not receive any SMS
messages.
The message is played back.
You receive SMS messages dur-
ing the day only.
Possible cause
(CLIP) function has not been
activated.
SMS transmission was inter-
rupted (e.g. by a call).
No number or the wrong
number has been entered for
the SMS centre activated as the
send centre.
The telephone memory is full.
The provider has not transmit-
ted the rest of the SMS yet.
You have changed your mail-
box ID.
You have not activated your
mailbox.
The "Display telephone
number" function has not been
activated.
The end device is stored in your
SMS provider's database as not
enabled for fixed line SMS mes-
sages, i.e. you are no longer
registered there.
If your SMS network provider's
database does not know that
your end device supports the
fixed line SMS function, it tries
to relay messages only during
the day.
SMS (text messages)
Remedy
Have your telephone company
activate this function.
Send the SMS again.
Enter the telephone number.
Delete old SMS messages
(page 53).
Tell your SMS partners the new
ID or restore the old ID
(page 58).
Activate your mailbox
(page 58).
Have your network provider
activate this function (chargea-
ble).
Have the device registered for
receiving SMS messages
(again).
Have the device registered for
receiving SMS messages
(again) so that it is correctly
recorded in the database.
63