Siemens Gigaset S100 User Manual page 65

Loading a new ringer tone or logo
The display shows You have new messages Û.
[RRRRRRRRRRRRRRRRRRRRRR]
Read
[RRRRRRRRRRRRRRRRRRRRRR]
Install
[RRRRRRRRRR]
Yes
OK
If you do not like the melody or logo, after
terminated.
After loading, the melody or logo will remain in the incoming SMS list
N
until you delete it by pressing the display key
i
You can also load the melody or logo from other handsets registered
N
at the same base station.
How to open a logo or melody is explained on page 56.
N
Activating/deactivating a logo
[______________________________________________]
H/Set Settings
[______________________________________________]
Screen Picture
The logo is not displayed:
during a call,
N
if the room monitor or Walk and Talk function is activated,
N
i
if you have just received an SMS or a message on the answering
N
machine (only S 150),
if the handset is de-registered.
N
Press the key to open the incoming list (page 52).
The first new SMS will be displayed.
Scroll to another SMS if you want.
Press the display key. You can tell from the title or
icon that you have been sent data for loading the
melody/logo. You will hear the new melody or see a
preview of the new logo.
If you like the melody or logo:
Press the display key to start the loading process.
Press the display key to load the new melody or logo.
For a new melody: Select the number of the old
ringer melody you want to replace with the new one.
As a precaution you will hear the old ringer melody.
Confirm.
Install
Open the menu.
Select the menu item and confirm.
OK
Select and confirm to activate or deactivate the logo
OK
(‰ = on).
Hold down (return to idle).
SMS (text messages)
press . The loading process will be
No
(page 53).
Delete
61