Setting The S 150 Base Station Answering Machine; Ring Delay And Charge Saving Function For Remote Operation - Siemens Gigaset S100 User Manual

Setting the S 150 base station answering machine

Setting the S 150 base station answering
machine
The answering machine has already been preset for you at the factory. You can however
make individual settings using the handset.

Ring delay and charge saving function for remote operation

You can also decide when the answering machine should be activated. You can choose:
0 sec., after 10 sec., 20 sec. (factory setting) or 30 sec.. Instead of a fixed ring delay
you can select the charge saving function Auto.
The answering machine switches itself on automatically
after 10 seconds if there are new messages;
N
after 20 seconds if there are no new messages.
N
After about 15 seconds you know during the remote operation that there are no new
messages (otherwise the answering machine would have already been activated). If you
hang up now, the call will not cost you anything.
Please note:
Only ringer melodies 1–3 correspond to the ringer tones during a call.
N
i
During all ringer tones the first ringer tone is suppressed. You can
N
deactivate the suppression of the first ringer tone (page 99).
[______________________________________________]
Voice Mail
[______________________________________________]
Ring Delay
[RRRRRRRRRRRRRRRRRRRRRR]
Save
78
Open the menu
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select ring delay (0 sec., 10 sec., 20 sec., 30 sec.,
Auto).
Press the display key to save the setting.