Disassembling The Top Part Of The Base - Siemens SL 10 Service Manual

4.2.4 Disassembling the Top Part of the Base

1. First remove the microphone holder and the flexible microphone cable attached to it from
the microphone housing.
1. Then detach the flexible keypad cable from the ZIF-
plug (ZIF=Zero Insertion Force).
To do so, please first open the retaining clip and pull
out the cable afterwards.
2. Remove the ringer gasket.
3. Now remove the four torx flat-head screws on the
screen lid and the two torx countersunk-head screws on
the side of the microphone.
1. Now remove the control module and the screen lid.
2. Finally, remove the microphone.
Now you completed disassembling the Top of base.
Service Manual SL10
Sm_sl10_lvl2_v11.doc
Private Communication Systems
V1.1
Page 9 of 22
Mobile Phones
PN MP ST
R. Fleuren
05/98