Install The Paper Cassette; Place The Paper - Sharp SF-2040 Service Manual

14. Install the paper cassette.

Lift the rear sides of the paper cassette and insert the both right of
guides into the Copier by fitting them to the guide rails as shown in
the figure. Make sure that the paper cassette slides smoothly.
Guide rail
Guide

15. Place the paper.

Place the paper in the cassette.
Do not stack the paper higher than the maximum height line.
Next, push the cassette all the way into the copier.
Maximum
height line
16. Remount the front right cabinet panel and the
right cabinet panel to the desk.
Return the front right cabinet panel which has been removed in step
4 and secure it in its original position using the mounting screw.
Next, return and secure the right cabinet panel in its original position
using the two mounting screws.
Check to be sure that the hooks on the front right cabinet panel and
the right cabinet panel are securely locked into the grooves on the
desk.
Mounting screw
Front right cabinet panel
Guide rail
Guide
Mounting screws
Hooks
Right panel
Hook
17. Adjust any center misalignment.
Make a copy, and if there is any center misalignment such as that
shown in Fig. 1 or Fig. 2, loosen the four screws (indicated by the
arrows) which secure the front cabinet panel.
b
a
NOTE:
The mounting screws a and b will be in the symmetrical positions
when they are tightened, as shown right.
(Reference figure)
•
If misaligned as shown in Fig. 1
Move the front cabinet panel in direction A and retighten the two
mounting screws a and then the other two screws b. Make
another copy to confirm that the center is no longer misaligned.
Fig.1
Center line of the first copy image
•
If misaligned as shown in Fig. 2
Move the front cabinet panel in direction B and retighten the two
mounting screws a and then the other two screws b. Make
another copy to confirm that the center is no longer misaligned.
Fig.2
Center line of the first copy image
5 – 33
b
Direction A
a
Direction B
b
a
Paper center line
Paper center line