Table of Contents
Advertisement
(4) SF-S15 (20-Bin Sorter)
SF-S15
Parts list
Support guide
Sorter seat
Sorter seat mounting
fixture (1 pc.)
Sorter seat mounting
Sorter seat mounting
Bracket mounting
screws A (2 pcs.)
screws B (1 pc.)
screws B (2 pcs.)
Unplug the copier and follow the procedure below.
1. Install the support guide.
Hook the pawls (two locations) of the support guide to the inside of
the copier paper exit end to install the guide as shown in Fig.
Support guide
5 – 19
2. Mount the sorter seat to the desk.
Remove the two cut-outs in the cabinet panel on the left side of the
desk.
Secure the two sorter seat mounting screws A to the desk.
Next, hook the sorter seat onto the two sorter seat mounting screws
A which were secured to the desk, and then use the one sorter seat
mounting screw B to secure the sorter seat mounting fixiture as
shown.
Sorter seat mounting
screws A
Cut-out
Cut-out
Desk
Sorter seat mounting
fixture
Sorter seat mounting
Sorter seat
screw B
3. Remove the front panel of the sorter.
Loosen the four mounting screws in the front panel of the sorter and
remove the panel.
Mounting
screws
Front panel
of sorter
Mounting
screws
Hide quick links:
Advertisement
Table of Contents
