Table of Contents
Advertisement
Rail mounting plate: 1
Green label: 1
Support guide: 1
Sorter protection mat: 1
Stapling location label A: 1
Stapling location label D: 1
Before installing
Before installing to copier model SF-2025 or
SF-2030, turn the DIP switches to "ON".
Remove the 2 mounting screws securing the sorter control cover,
then remove the sorter control cover.
Next, move dip switch number 5 to the "ON" position (the dip
switches are attached to the sorter controller circuit board).
Reattach the sorter controller cover in its original position and secure
it with the 2 mounting screws.
Mounting screws
Sorter control cover
Dip switches
Sorter control circuit board
Be sure that you have plenty of room around the
copier for work space.
1.0m
Remove the securing fixtures and attach the caster
spacers.
When performed on the skid.
Remove the securing fixtures (2).
Securing fixtures
Remove the caster screws (2 per caster) and take off the 4 casters.
Next, attach the casters and caster spacers using 2 screws each (M4
x 50) as shown in the figure.
Caster spacers
Caster screws
Casters
Caster spacer
Caster screws
Caster spacer
Casters
5 – 13
Hide quick links:
Advertisement
Table of Contents
