Adjustments - Exerpeutic 1111 Owner's Manual

Adjusting the Tension Control Knob
To increase the load, turn the tension control knob in a
clockwise direction.
To decrease the load, turn the tension control knob in a
counterclockwise direction.
Adjusting the Rear Stabilizer End Cap
Turn the rear stabilizer end cap on the rear stabilizer as
needed to level the elliptical trainer
Adjusting the Seat Forward or Back
Release the both triangle knobs from the rear main frame.
Turn the round knob in a counterclockwise direction until it
can be pulled out. Pull out the round knob and then slide
the back and seat support bracket back or forth direction to
the suitable position. Lock the back and seat support
bracket in place by releasing the round knob and sliding the
back and seat support bracket back or forth slightly until the
round knob "pops" down into the hole of the seat sliding
tube. For added safety, tighten the round knob and both
triangle knobs in a clockwise direction.
NOTE: When adjusting the seat back or forth
direction, make sure the bushing does not
exceed the mark line on the seat sliding tube.

ADJUSTMENTS

18
Tension Control Knob
Rear Stabilizer End Cap
Round Knob
Triangle Knob
M12x33
Triangle Knob
M12x27