Exerpeutic 1111 Owner's Manual page 11

Tool:
Allen Wrench S6
1. Rear Main Frame Installation
Remove two M8x30 Bolts (49), four M8x15 Bolts (23), and six Ø8 Washers (24)
from the Rear Main Frame (3). Remove bolts with the Allen Wrench provided.
Connect the Middle Section Hand Pulse Sensor Wires (55) from the Rear Main
Frame (3) to the Extension Hand Pulse Sensor Wires (65) from the Front Main
Frame (5). Attach the Rear Main Frame (3) into the Front Main Frame (5) with two
M8x30 Bolts (49), four M8x15 Bolts (23), and six Ø8 Washers (24) that were
removed. Tighten bolts with the Allen Wrench provided.
9
ASSEMBLY