Blower (Optional) - Quadra-Fire 57ST-ACC Installation Manual

H. Blower (Optional)
1. Align holes in mounting fl ange of blower with bolt holes in
appliance. Blower should be positioned at bottom of rear
outer skin as shown in Figure 23.1.
2. Insert and tighten bolts supplied with the kit, securing
blower onto outer wall of appliance.
3 Place the bracket containing the snap disc and magnet
under the bottom left rear corner as shown in Figure 23.1.
See pages 15 and 21 for detailed operating instructions
for the blower and snap disc.
Figure 23.1
August 3, 2015
Snap Disc
Bracket
with
Magnet
Secure wires
with wire tie
Shock Risk.
• Do NOT remove grounding prong from plug.
• Plug directly into properly grounded 3 prong
receptacle.
• Route cord away from appliance.
• Do NOT route cord under or in front of appliance.
MANUAL: Over-rides the
Snap Disc
MANUAL
FAN
AUTO
AUTO: Fan will turn ON/OFF
LOW
Automatically by the Snap Disc
HIGH
OFF
Controls the Fan Speed
7038-206E
5700 STEP TOP
CAUTION
23