Deleting Trust Lists (Cucm Only) - Cisco TelePresence System Codec C40 Administrator's Manual

Cisco TelePresence System Codec C40/C60 and Profiles using C40/60 Administrator Guide
Contents Introduction Web interface Web interface System settings Setting passwords Appendices
Navigate to: Configuration > Security

Deleting trust lists (CUCM only)

The Cisco Unified Communications Manager (CUCM) and
Certification Authority Proxy Function (CAPF) information
that is shown on the Security page is only relevant for video
systems that are registered to CUCM.
The web interface can be used to delete an existing
Certificate Trust List (CTL) that is stored on the video system.
Normally, you will not delete the old CTL file, but there are a
few cases when you will need to delete it.
For more information about CUCM, CAPF and trust lists, read
the Administering TC Endpoints on CUCM guide available on
the Cisco web site.
D14636.10 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.1, APRIL 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
44