Deleting Trust Lists (Cucm Only) - Cisco TelePresence MX200 Administrator's Manual

Cisco TelePresence MX200 and MX300 Administrator Guide
Contents Introduction Web interface Web interface System settings Setting passwords Appendices

Deleting trust lists (CUCM only)

Navigate to: Configuration > Security: CUCM tab
The information on this page is only relevant for
video systems that are registered to a Cisco Unified
Communications Manager (CUCM).
The web interface can be used to delete existing trust lists
(CTL and ITL) that are stored on the video system. Normally,
you will not delete the old CTL and ITL files, but there are a
few cases when you will need to delete them.
The trust lists' fingerprints and an overview of the certificates
in the lists are displayed on the web page. This information
can be useful for troubleshooting.
For more information about CUCM and trust lists, read the
Administering TC Endpoints on CUCM guide available on the
Cisco web site.
D14850.12 MX200 and MX300 Administrator Guide TC7.3, JULY 2015. www.cisco.com — Copyright © 2011–2015 Cisco Systems, Inc. All rights reserved.
42