Cisco TelePresence System Codec C40 Administrator's Manual page 68

Cisco TelePresence System Codec C40/C60 and Profiles using C40/60
Contents
Conference [1..1] Multipoint Mode
Define how the video system handles multiparty video conferences.
If registered to a Cisco TelePresence Video Communication Server (VCS), the video system
can either use its own built-in MultiSite feature, or it can rely on the MultiWay network solution.
MultiWay requires that the video network includes a multipoint control unit (MCU).
If registered to a Cisco Unified Communications Manager (CUCM) version 8.6.2 or newer, the
video system can use either the CUCM conference bridge, or the video system's own built-in
MultiSite feature. Which one to use is set-up by CUCM.
Both Multiway and the CUCM conference bridge allows you to set up conferences with many
participants. The MultiSite feature allows up to four participants (yourself included) plus one
additional audio call.
Note that the MultiSite feature is optional and may not be available on all video systems.
Requires user role: ADMIN
Value space: <Auto/Off/MulitSite/MultiWay/CUCMMediaResourceGroupList>
Auto: If a MultiWay address is specified in the NetworkServices MultiWay Address setting,
MultiWay takes priority over MultiSite. If neither MultiWay nor MultiSite is available, the
Multipoint Mode is set to Off automatically.
Off: Multiparty conferences are not allowed.
MultiSite: Multiparty conferences are set up using MultiSite. If MultiSite is chosen when the
MultiSite feature is not available, the Multipoint Mode will be set to Off.
MultiWay: Multiparty conferences are set up using MultiWay. The Multipoint Mode will be set
to Off automatically if the MultiWay service is unavailable, for example if a server address is
not specified in the NetworkServices MultiWay Address setting.
CUCMMediaResourceGroupList: Multiparty conferences (ad hoc conferences) are hosted by
the CUCM configured conference bridge. This setting is provisioned by CUCM in a CUCM
environment and should never be set manually by the user.
Conference 1 Multipoint Mode: Auto
Example:
D14636.10 Profile C60-C40 and Codec C60-C40
Introduction Web interface
Administrator Guide TC6.1, APRIL 2013.
System settings System settings
Conference [1..1] IncomingMultisiteCall Mode
Select whether or not to allow incoming calls when already in a call/conference.
Requires user role: ADMIN
Value space: <Allow/Deny>
Allow: You will be notified when someone calls you while you are already in a call. You can
accept the incoming call or not. The ongoing call may be put on hold while answering the
incoming call; or you may merge the calls (requires MultiSite or MultiWay support).
Deny: An incoming call will be rejected if you are already in a call. You will not be notified
about the incoming call. However, the call will appear as a missed call in the call history list.
Conference 1 IncomingMultisiteCall Mode: Allow
Example:
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
68
Administrator Guide
Setting passwords Appendices