Deleting Trust Lists (Cucm Only) - Cisco TelePresence System Codec C40 Administrator's Manual

Cisco TelePresence System Codec C40/C60 and Profiles using C40/60 Administrator Guide
Contents Introduction Web interface Web interface System settings Setting passwords Appendices

Deleting trust lists (CUCM only)

Navigate to: Configuration > Security: CUCM tab
The information on this page is only relevant for
video systems that are registered to a Cisco Unified
Communications Manager (CUCM).
The web interface can be used to delete existing trust lists
(CTL and ITL) that are stored on the video system. Normally,
you will not delete the old CTL and ITL files, but there are a
few cases when you will need to delete them.
For more information about CUCM and trust lists, read the
Administering TC Endpoints on CUCM guide available on the
Cisco web site.
D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
48