Cisco TelePresence System Codec C40 Administrator's Manual page 58

Cisco TelePresence System Codec C40/C60 and Profiles using C40/60
Contents
Audio Input Microphone [1..2]/[1..4] VideoAssociation MuteOnInactiveVideo
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone
connectors.
Enable association of a video source to a microphone audio input.
Requires user role: ADMIN
Value space: <Off/On>
Off: No video source is associated.
On: A video source is associated, and the audio will be muted if the associated video source
is not displayed.
Audio Input Microphone 1 VideoAssociation MuteOnInactiveVideo: On
Example:
Audio Input Microphone [1..2]/[1..4] VideoAssociation VideoInputSource
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone
connectors.
Select the associated video input source.
Requires user role: ADMIN
Value space: <1/2/3>
Range: Select one of the video input sources.
Audio Input Microphone 1 VideoAssociation VideoInputSource: 1
Example:
Audio Input Microphone [1..2]/[1..4] Level
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone
connectors.
Define the audio level of the Microphone input connector, in steps of 1 dB.
See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete
overview of the values represented in dB.
Requires user role: ADMIN
Value space: <0..24>
Range: Select a value from 0 to 24 dB.
Audio Input Microphone 1 Level: 15
Example:
D14636.10 Profile C60-C40 and Codec C60-C40
Introduction Web interface
Administrator Guide TC6.1, APRIL 2013.
System settings System settings
Audio Input Microphone [1..2]/[1..4] Mode
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone
connectors.
Set the audio input microphone mode.
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable the microphone connector.
On: Enable the microphone connector.
Audio Input Microphone 1 Mode: On
Example:
Audio Input Microphone [1..2]/[1..4] Type
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone
connectors.
The microphone connectors are intended for electret type microphones. The microphone
connector can be set to line or microphone mode.
Requires user role: ADMIN
Value space: <Microphone/Line>
Microphone: Select Microphone when you have 48 V Phantom voltage and the pre-
amplification is On.
Line: Select Line when you have a standard balanced line input. The phantom voltage and
pre-amplification is Off.
Audio Input Microphone 1 Type: Line
Example:
Audio Output HDMI [1] Level
Define the output level of the HDMI output connector, in steps of 1 dB.
See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete
overview of the menu values represented in dB.
Requires user role: ADMIN
Value space: <-24..0>
Range: Select a value from -24 to 0dB.
Audio Output HDMI 1 Level: 0
Example:
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
58
Administrator Guide
Setting passwords Appendices