Choosing A Ringtone - Cisco TelePresence System Codec C40 Administrator's Manual

Cisco TelePresence System Codec C40/C60 and Profiles using C40/60
Contents

Choosing a ringtone

You can choose from a set of predefined ringtones. The
chosen ringtone can be played back from this page.
Even if the web interface is used to initiate the
playback it is the video system that plays back the
ringtone; it is not the PC running the web interface.
D14636.10 Profile C60-C40 and Codec C60-C40
Introduction Web interface Web interface
Navigate to: Configuration > Personalization : Ringtone tab
Choosing a ringtone
Choose a ringtone from the drop-down list,
and click
Playing back a ringtone
Click the play button ( ► ) to play back the
ringtone.
Use the stop button (  ) to end the playback.
You must save the ringtone before it
can be played back.
Administrator Guide TC6.1, APRIL 2013.
System settings
Save to make it the active ringtone.
32
Setting passwords
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices