Cisco TelePresence System Codec C40 Administrator's Manual page 56

Cisco TelePresence System Codec C40/C60 and Profiles using C40/60
Contents
Audio Input Line [1..2] VideoAssociation MuteOnInactiveVideo
Enable association of a video source to a Line audio input.
Requires user role: ADMIN
Value space: <Off/On>
Off: No video source is associated.
On: A video source is associated, and the audio will be muted if the associated video source
is not displayed.
Audio Input Line 1 VideoAssociation MuteOnInactiveVideo: Off
Example:
Audio Input Line [1..2] VideoAssociation VideoInputSource
Select the associated video input source.
Requires user role: ADMIN
Value space: <1/2/3>
Range: Select one of the video input sources.
Audio Input Line 1 VideoAssociation VideoInputSource: 1
Example:
Audio Input Line [1..2] Channel
Define whether the Audio Line input is a mono signal or part of a multichannel signal.
Requires user role: ADMIN
Value space: <Right/Left/Mono>
Right: The Audio Line input signal is the right channel of a stereo signal.
Left: The Audio Line input signal is the left channel of a stereo signal.
Mono: The Audio Line input signal is a mono signal.
Audio Input 1 Channel: Left
Example:
D14636.10 Profile C60-C40 and Codec C60-C40
Introduction Web interface
Administrator Guide TC6.1, APRIL 2013.
System settings System settings
Audio Input Line [1..2] Level
Define the audio level of the Line input connector, in steps of 1 dB.
See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete
overview of the menu values represented in dB.
Requires user role: ADMIN
Value space: <0..24>
Range: Select a value from 0 to 24 dB.
Audio Input Line 1 Level: 10
Example:
Audio Input Line [1..2] LoopSuppression
Codec C40 and C60 currently does not support loop suppression, hence it is always Off.
Requires user role: ADMIN
Value space: <Off>
Off: Deactivate Loop Suppression.
Audio Input Line 1 LoopSuppression: Off
Example:
Audio Input Line [1..2] Mode
Set the audio input line mode.
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable the Audio Line input.
On: Enable the Audio Line input.
Audio Input Line 1 Mode: On
Example:
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
56
Administrator Guide
Setting passwords Appendices