Cisco TelePresence System Codec C40 Administrator's Manual page 35

Cisco TelePresence System Codec C40/C60 and Profiles using C40/60
Contents
User administration, continued
Creating a new user account
Follow these steps in order to create a new user account:
1. Click Add new user....
2. Fill in the Username, Password and PIN code*, and check
the appropriate user roles check boxes.
As a default the user has to change the password and
PIN code when signing in for the first time.
Do not fill in the Distinguished Name (DN) Subject field
unless you want to use certificate login on https.
3. Set the Status to Active to activate the user.
4. Click Create User to save the changes.
Use the Back button to leave without making any
changes.
The password is used with the web interface and command line
*
interface.
The PIN code is used with the on-screen menu.
D14636.10 Profile C60-C40 and Codec C60-C40
Introduction Web interface Web interface
Navigate to: Configuration > User Administration
Administrator Guide TC6.1, APRIL 2013.
System settings
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
35
Administrator Guide
Setting passwords Appendices