Go To Search; Log List Search - Nuvico EV2-400 Instruction Manual

3. Go to Search

1. Press [Time Search] button for 2 seconds. Then [Time Input] menu will pop up.
2. Set the date and time you wish to search.
3. Press [ENTER] to start search.

4. Log List Search

The logs can be used to search and review directly to a point in time of the recorded data.
Alarm, motion, video loss and system related logs can be searched and played back directly
from the time of the incident.
１.
To start Event Search, press
pops up, as shown below.
[Log] button on IR Remote, then Log List Menu
76 EV2 Series DVR