Smart Status - Nuvico EV2-400 Instruction Manual

3. Status
1) Stable: The HDD is in stable status. : The HDD is in stable status.
2) Sync: Copy Master HDD : Copy Master HDD to the Slave HDD.
3) Re-sync: To force all pending buffered disk writes to the
4) Recover: To force all pending buffered disk writes to
5) Faulty.
4. Action: Remove HDD. : Remove HDD.
The "Are you sure?" dialog box opens.
Press up/down [

5.3. SMART STATUS

It displays HDD information
S.M.A.R.T information has slight
It recommended exchanging the HDD when the HDD status is
*NOT: Please refer to STATUS explanation : Please refer to STATUS explanation
Status
GOOD
PRE-FAIL
PAST PRE-FAIL
FAIL
To force all pending buffered disk writes to the NEW installed
force all pending buffered disk writes to the slave
dialog box opens.
] buttons to YES or NO, then buttons to YES or NO, then press [-, +] button to
information such as Bad sector, temperature, HDD running time. such as Bad sector, temperature, HDD running time.
has slight different between different HDD manufactures.
the HDD when the HDD status is in <PRE-FAIL>
Explanation
GOOD
Alerts that may have Alerts that may have problem
"PRE-
-FAIL"was occurred before
Find problem / need to replace Find problem / need to replace
between different HDD manufactures.
43
NEW installed disk.
the slave disk.
button to select.
FAIL>
EV2 Series DVR