General - Nuvico EV2-400 Instruction Manual

6.2. GENERAL

1. Access Port: Select "0001 ~ 9999"
Enter the port number that the client will use to communicate with the DVR over the
internet. The default port is 7000. It is recommended to use over 1,000.
2. Bandwidth: Select the network bandwidth to limit the amount of network resources
allocated to client connection. The default is unlimited: " 4 KBPS~ 8 MBPS"
3. Ping Block: No response for ping. Default by off.
4. Scan Block: No response for Auto Scan from EMS. Default by OFF
5. Stream Mode : Select network stream mode between Dual or Optimized
Dual: Streaming the video/audio data with a specified quality, it's independent of
1)
recording configuration
<Note> Max Dual stream for Network
NTSC Available F/S by channel
Optimized: Streaming the video/audio data with a maximized throughput, it
2)
depends on recording configuration but use manufacture's own method.
It provides better network streaming rate.
Example
RECORDING SETUP
D1/2CIF,CIF
D1/2CIF,CIF
6. Stream Property: It's activated when you select dual streaming.
7. Access Host and Host List: Allows you to access or deny specific IP address.
CIF, 7 F/S
30 (25) FPS
1~15 (1~12) FPS
PAL
NETWORK STREAM
D1/2CIF,CIF
D1/2CIF,CIF
45
Available F/S by channel
CIF, 6 F/S
30 (25) FPS
15 (12) FPS
EV2 Series DVR