Preset & Tour - Nuvico EV2-400 Instruction Manual

5) To escape from PTZ mode, press ESC button o To escape from PTZ mode, press ESC button on PTZ controller
button) the outside of control box to have the virtual remote control button) the outside of control box to have
ESC button.
2. Preset & Tour
Button
Set preset position; SPOT OUT on remote controller Set preset position; SPOT OUT on remote contro
Move the PTZ into desired location. Move the PTZ into desired location.
Press the Preset button. Press the Preset button.
Custom 1 will illuminate. Custom 1 will illuminate.
Set the # for the Preset location. Set the # for the Preset location.
Press OK to save and exit. Press OK to save and exit.
Go to preset position; INFO on remote controller Go to preset position; INFO on remote controller
Press Go to button. Press Go to button.
Enter the desired Preset # and press OK. Enter the desired Preset # and
Start Auto Tour; BACKUP on remote controller Start Auto Tour; BACKUP on remote controller
Press Auto Tour Button. Press Auto Tour Button.
Press the + button and enter the range of Preset and press OK. Press the + button and enter the range of Preset and press OK. Press the + button and enter the range of Preset and press OK.
Function
67
controller. Or click (right
controller. Then click
EV2 Series DVR