Ptz Event - Nuvico EV2-400 Instruction Manual

7.3. PTZ EVENT

When such as alarm trigger, motion detected or video loss occurs, this DVR sends preset
command to PTZ camera. PTZ option must be enabled and a protocol must be assigned to
the camera channel.
1. Channel: Select desired PTZ camera.
2. Active: configure PTZ action [ NONE
group when event detected.
3. Inactive: Select Camera position after event duration expires.
4. Event
Press [ENTER] to edit multiple events. The menus are displayed with options on the
left-hand column and settings in the right hand column. A cursor (highlighted menu)
can be moved using the Direction buttons [
<Note> Do not set up Motion detection on PTZ camera for PTZ event. The signal will be
looping
5. Select SAVE to save changes and press [ENTER] button to exit the menu.
Exit the menu without making changes, press [CANCEL] button.
Edit.
① ②
GOTO TOUR ] and Preset number or Tour
] on IR remote or front panel.
58
④
③
EV2 Series DVR