Schedule; Chart Setup - Nuvico EV2-400 Instruction Manual

4. SCHEDULE

When the schedule is on, users may define their own daytime, night time, as well as
specified date settings. A schedule can be used to record selected cameras at different
Times, changes record rates, and select whether alarms or event is enabled. By selecting
Schedule USE "on" Record setup, Night Mode will be activated.

4.1. CHART Setup

The schedule chart shows a graphical representation of the defined record mode. Night
mode will be set by default. However, the schedules are only displayed if a corresponding
schedule has been configured in the schedule menu.
* DAY (Yellow): It follows day setting on record.
* Night (Green): It follows automatically night setting.
* No Record (Blue): The video is displayed, but does not record video.
1) A cursor (highlighted menu) can be moved using the Direction buttons [
2) Select each day to configure, press [ENTER] or clicking by mouse.
3) Detailed menu pops up for select day, as shown below.
38
].
EV2 Series DVR