Switch Setup (Monitor Configure) - Nuvico EV2-400 Instruction Manual

1.2. SWITCH Setup (Monitor Configure)

1.2. SWITCH Setup (Monitor Configure)
1. The menus are displayed with options on the left The menus are displayed with options on the left-hand column and settings in the right
hand column. A cursor (highlighted menu) can be moved using the Direction buttons hand column. A cursor (highlighted menu) can be moved using the D hand column. A cursor (highlighted menu) can be moved using the D
[ ] .
2. Settings
1) Device: Each Monitor may be configured in different way.
[MAIN
2) Dwell Time: Select the interval that each camera or Multi screen mode is displayed Dwell Time: Select the interval that each camera or Multi screen mode is displayed Dwell Time: Select the interval that each camera or Multi screen mode is displayed
in a rotation. Use [-, +]
3) Mode: Select the appropriate monitor dis Select the appropriate monitor display to make any adjustment. This Mode
will be activated while it's in Switch Mode. will be activated while it's in Switch Mode.
a. Sequence: Automatic Sequence.
b. Shift: Selected camera will Selected camera will be displayed after dwell time.
c. Event: To display particular camera in full screen or in multi mode when : To display particular camera in full screen or in multi mode when event : To display particular camera in full screen or in multi mode when
triggered.
tor may be configured in different way.
SPOT1 ] SPOT1 ]
, +] button to change : [1 second ~ 30 second]
Automatic Sequence.
hand column and settings in the right
[1 second ~ 30 second]
25
adjustment. This Mode
EV2 Series DVR