Table of Contents
Advertisement
3.2 Quick Setup
3.2.1 NVR Setup
Quick Setup is specially designed to enable easier & faster configuration for the major NVR settings such as NVR network
setup, IP camera search & registration. When the NVR boots up, the Quick Setup will be operated automatically after logging
in. The Quick Setup pop-up is controllerable in the main menu. There are two ways for connecting to network setup: DHCP or
Static IP.
The fatory default setting is as followings:
[WAN Port]
IP Address: 192.168.1.160
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
3.2.2 IP Camera Connection
When the IP cameras are connected to the NVR, the user can search the connected cameras by clicking the 'Search'
button. Once the cameras are searched, check the box of each camera and click the 'Add to Camera List' button. Then
the cameras will be shown in the list at the bottom. Click 'Save' button.
In case of requiring the ID and Password for certain IP cameras for proper registration, please click the
N
OTE
'Edit' button. The ID and Password should be the one which are used for web configuration page.
[Local Port: Switch Setting]
IP Address: 10.10.1.1
Subnet Mask: 255.255.255.0
Gateway: 10.10.1.1
User's Manual | 12
Advertisement
Table of Contents
