Electrical Connector Maintenance; Control Unit Connector - Beta RR 350 EFI Operating Instructions Manual

4
To prevent malfunction of the electrical system, treat electric contacts and switches
with electrical contact spray.
ATTENTION: any oxidation of electrical contacts may result in serious malfunc-
tioning to the power supply system.
Specifically, treat the battery poles as described on page 64 and pay particular
attention to what is contained here below.
GB
ELECTRICAL CONNECTOR
MAINTENANCE
Disconnect the connectors listed below,
blow compressed air on the connector both
on the system and on the component side,
and treat electrical contacts and switches
with spray for electrical contacts.

CONTROL UNIT CONNECTOR

The connector is positioned as indicated
in figure.
To access it, remove the air filter cover side
(page 77).
To remove the connector one must:
1) press the lock device;
68