Beta RR 350 EFI Operating Instructions Manual page 30

2
USE ON PARTICULARLY WET AND MUDDY SOILS
 Apply an anti-water cap for the water filter
 Assemble a steel crown. For this operation contact the Betamotor service net-
work.
 Verify that the radiator fins are clean
 Verify that the radiator fins are not bent
 After use, proceed with washing (page 67)
DRIVING IN HIGH TEMPERATURE AND LOW SPEED CONDITIONS
 Adjust crown size based on the route.
Note: The oil has a tendency to heat up quickly when there is frequent clutch
use and when using a crown whose dimensions are excessive. For this opera-
tion contact the Betamotor service network.
 Clean the chain
 Verify that the radiator fins are clean
 Verify that the radiator fins are not bent
 Verify cooling liquid level (page 43)
 For this use it is recommended to use an electric fan (optional). For the code,
refer to the Betamotor accessory catalogue.
DRIVING IN LOW TEMPERATURE AND SNOW CONDITIONS
 Apply water protection to the air filter
 After use, proceed with washing (page 67)
GB
30