Label location RS4T USA ..........3 Controls RR4T USA ............ 4 Controls RS4T USA ............ 5 Digital speedometer RR4T USA - RS4T USA ....6 Wiring diagram RR4T USA ........10 Wiring diagram RS4T USA ........12 Fuel cock ............... 14 Choke ..............
CONTROLS RR4T USA RH SWITCH Starte button 1 is located on the right-hand side of the handlebars and operate the electri engine starter. Push the button until the engine sterts. Do not press the button 1 while the engine is running.
CONTROLS RS4T USA RH SWITCH Starte button 1 is located on the right-hand side of the handlebars and operate the electri engine starter. Push the button until the engine sterts. Do not press the button 1 while the engine is running. While button 2 turns off the engine.
DIGITAL SPEEDOMETER RR4T USA Note: Information for setting the RR4T USA digital dashboard is in the Main Manual and vehicles for the US market are factory set in Mph. DIGITAL SPEEDOMETER RS4T USA CYCLING THROUGH THE FUNCTIONS It is always possible to cycle through the different functions while the vehicle is stationary or in motion.
Page 9
CURRENT SPEED FUNCTION This information is constantly displayed to- gether with an indication provided by a graphic bar. The default unit is Mph. To change the unit, press the button to access the Setup menu and select km/h. When Mph is selected, no indication is provided as to which unit is currently displayed.
Page 10
4 - AUTOMATIC TRIP FUNCTION (TD) T≥ 3” resets LAP and TD T<3” cycles through functions This function is always accompanied by the TD caption. The information displayed represents the total distance covered by the vehicle in kilometres or miles (according to the selected unit).
Page 11
SLEEP MODE One minute after the last pulse from the speed sensor has been received, or after the button was last depressed, the microcontroller switches to a power-saving status named Sleep Mode. In order to save power, all standard instrument activity is suspended, the display and the backlighting are turned off (if the vehicle has no battery the backlighting is automatically turned off as soon as the engine is switched off) and only the clock remains in operation.
Page 13
WIRING DIAGRAM RR4T USA WHEEL SENSOR STARTING BUTTON PUSHBUTTON SCROLL NO CONNECT TELL TALE LAMP NO CONNECT TELL TALE LAMP NO CONNECT TELL TALE LAMP DISPLAY ENGINE STOP BUTTON LIGHTS SWICH CONTROL GROUP REGULATOR ELECTROVALVE KIT (OPTIONAL) TAIL LAMP (LED)
FUEL COCK OFF Fuel cock 1 is closed. ON Before using the vehicle, turn the knob to ON. This allows the fuel to flow to the carburettor. When the fuel cock is in the ON position the fuel tank empties until only the reserve fuel is left.
CHOKE When choke 1 is pulled out completely, a hole is opened in the carburettor through which the engine can suck in extra fuel. This makes it possible to obtain a rich fuel- air mixture suitable for cold starting. To deactivate the choke, push it in to its start- ing position.
Betamotor S.p.A has always been sensi- tive to environmental protection, and all vehicles comply with the applicable regu- lations on harmful gas emissions and sound pollution. CANISTER RS4T USA FILTER SYSTEM The extra system with a Canister 1 emis- sion filter and vacuum valve 2 prevent the release of vapours into the atmosphere.