Vehicle Preparation For Use In Heavy-Duty Conditions - Beta RR 350 EFI Operating Instructions Manual

VEHICLE PREPARATION FOR USE IN HEAVY-DUTY
CONDITIONS
Using the vehicle in heavy-duty conditions, such as sand or wet or muddy soils, may
require the corrective actions mentioned below.
The following are considered heavy-duty operating conditions:
 Dry sand
 Wet sand
 Particularly wet and muddy soils
 Driving in high temperature and low speed conditions
 Driving in low temperature and snow conditions
General actions:
 Verify filter and filter box cleaning (page 45)
 Verify tensioning and wear of the chain (page 62)
 Verify all electrical connectors, making sure they are well connected. Keep
them dry and clean.
USE ON DRY SAND
 Apply specific protection against sand to the air filter
 Clean the chain
 Assemble a steel crown. For this operation contact the Betamotor service net-
work. (Do not grease the chain!)
 Verify that the radiator fins are clean
 Verify that the radiator fins are not bent
USE ON WET SAND
 Apply an anti-water cap for the water filter
 Clean the chain
 Assemble a steel crown. For this operation, contact the Betamotor service
network. (Do not grease the chain!)
 Verify that the radiator fins are clean
 Verify that the radiator fins are not bent
29
2
GB