Chapter 2. Operation And Use; Control And Maintenance - Beta minitrial-e Owner's Manual

2. Chapter 2, Operation and use.

2.1. Control and maintenance.

It is advised that all repair or replacement operations are made by a qualified professional, but for
an optimal maintenance, it is also advised that you perform these operations before or after each
use:
2.1.1. Chain drive.
To extend the useful life of the chain, it is advised to grease it after each use by means of
specific grease for chains. For the maintenance of the chain, it is also pertinent to periodically
control its tightening. To tighten or loosen the chain:
- Loosen nut A.
- Act on B register (tighten to detension or loosen to
tension).
- Proceed on the same way on the register of the
other side of the wheel placing it on the same po-
sition. Check that the distance on both screws of
the register is the same.
- Check that the chain is aligned with the pinion of
the engine. In order for the chain not to go out of
the crown, it is important for it to work straight with
regard to the pinion.
- Tighten nut A.
8