Beta RR 350 EFI Operating Instructions Manual page 23

2
3 SCREENS
Switching between 3 normal modes
All of the information that the instrument is capable of providing is displayed on one
of these 3 screens.
The instrument will stay on the set screen until a button is pressed to switch to another
screen.
TO SWITCH FROM ONE SCREEN TO ANOTHER, PRESS EITHER THE RIGHT OR
LEFT BUTTON BRIEFLY.
Screen 1:
• Speed • Distance 1 (DST) • Time
Screen 2:
• Speed • Distance 2 (DST2 ) • Time
Screen 3:
• Maximum speed (MAX) • Average speed (AVG)
• Accumulated running time (ART) • Odometer (ODO)
* Note: The maximum and average speeds are updated automatically when the
user accesses screen 3.
4 FEATURES
General information:
During normal use the instrument is in "Normal" mode.
Available modes:
• Sleep Mode
• Choose from 3 "Normal" screens
• Clear Distance 1 (DST1)
• Clear Distance 2 (DST2)
• Clear Maximum/Average Speed (MAX/AVG)
Sleep Mode:
If the instrument does not receive any input for 5 minutes (either from the movement
of the wheel or a button), it will go into "Sleep Mode". In "Sleep Mode" only the
time appears on the screen.
To exit "Sleep Mode" all the instrument requires is an input, either from the movement
of the sensor or by pressing a button.
GB
23