Troubleshooting - Parmco PPOV-6S-MULTI Installation And Operating Instructions Manual

Table of Contents

Advertisement

2. If necessary, replace the halogen bulb with a 25 watt, 230 V, 300 °C heat - resistant oven light
bulb. Always use a cloth or tissue paper to hold the halogen bulb when inserting. This will stop oil
deposits from your fingers transferring on to the surface of the bulb.
3. Replace the glass cover.
Sometimes simple things can appear to be a problem with the product. The FAQ,s below are
offerred as a guide to help before calling Parmco.only. If you need extra advice please contact
Parmco on (09) 573 5678 or sales@parmco.co.nz. Please have your serial number and proof or
purchase ready as these will be needed to initiate any service call.
Q: What should I do if the oven doesn't heat up?
A: Check to see if one of the following actions resolves the issue:
● The oven may not be switched on. Switch the oven on.
● The clock may not be set. Set the clock (see section "Setting the clock").
● Check to see if the required settings have been applied.
● A household fuse may have blown or a circuit breaker may have tripped. Replace the fuses
or reset the circuit. If this happens repeatedly, call an authorised electrician.
Q: What should I do if, even though the oven function and temperature have been set, the oven
does not heat up?
A:There may be problems with the internal electrical connections. Contact Parmco
Q: What should I do if an error code appears and the oven does not heat up?
A: There is a fault in the internal electrical circuit connection. Contact Parmco
Q: What should I do if the time display is blinking?
A: There was a power failure. Set the clock (see section "Setting the clock").
Q: What should I do if the oven light doesn't illuminate?
A: The oven light is faulty. Replace the oven light bulb (see section "Changing the lamp").
Q: What should I do if the oven's fan is running without having been set?
A: Following use, the oven's fan runs until the oven has cooled down.
Error and Safety codes
Error and Safety codes
Er 3 or Er 4
Er 0

TROUBLESHOOTING

General Functions
TEMP SENSOR ERROR
COMMUNICATION FAILURE
Solution
Call Parmco
Call Parmco
- 22 -

Advertisement

Table of Contents
loading

Table of Contents