15
ELECTRICAL SYSTEM
15.7
Refitting the headlight mask with the headlight
15.8
Changing the headlight bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
–
Detach plug-in connectors
M00189-10
Main work
–
Connect plug-in connectors
M00189-11
–
Position the headlight mask and fix it with rubber straps
Info
Ensure the holding lugs engage in the fender.
–
Position the brake line and wiring harness. Put the clamp on and mount and
tighten screw
M00188-11
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Turn protection cap
all the way and remove it.
–
Pull bulb socket
K00167-10
and take off the headlight mask with the headlight.
.
.
p. 96)
together with the underlying bulb socket counterclockwise
of the parking light out of the reflector.
.
p. 94)
95