Turn Signal Switch; Emergency Off Switch; Electric Starter Button; Overview Of Indicator Lamps - KTM 500 EXC US Owner's Manual

6 CONTROLS
6.6

Turn signal switch

6.7

Emergency OFF switch

6.8

Electric starter button

6.9

Overview of indicator lamps

6.10

Ignition lock

Turn signal switch
Possible states
M00154-12
To switch off the turn signal, press the turn signal switch toward the switch housing.
The emergency OFF switch
Possible states
K00166-10
Electric starter button
Possible states
• Electric starter button
• Electric starter button
K00166-11
Possible states
K00152-01
The ignition lock
Possible states
K00153-10

is fitted on the left side of the handlebar.
Turn signal light off
Turn signal light, left, on – The turn signal switch is pressed to the left.
The turn signal switch returns to the middle position after activation.
Turn signal light, right, on – The turn signal switch is pressed to the
right. The turn signal switch returns to the middle position after activa-
tion.

is fitted on the right side of the handlebar.
Ignition off – In this position, the ignition circuit is interrupted, a run-
ning engine stops, and a non-running engine will not start.
Ignition on – In this position, the ignition circuit is closed and the
engine can be started.

is fitted on the right side of the handlebar.
in basic position
pressed – In this position, the electric starter is actuated.
The high beam indicator light lights up blue – The high beam is
switched on.
EFI warning lamp (MIL) lights up/flashes orange – The OBD has detected
an emission- or safety-critical fault.
The low fuel warning lamp lights up orange – The fuel level has reached
the reserve mark.
Turn signal indicator light flashes green – The turn signal is switched
on.

is on the right behind the headlight mask.
Ignition off – In this position, the ignition circuit is interrupted, a run-
ning engine stops, and a non-running engine will not start.
Ignition on – In this position, the ignition circuit is closed, and the
engine can be started.
17