11
TUNING THE CHASSIS
(EXC US)
–
Remove screws
lay it to one side.
–
Remove screws
–
Place the handlebar supports in the required position. Mount and tighten
screws
Guideline
Screw, handlebar holder
–
Position the handlebar.
M00993-11
–
Position the handlebar clamps. Mount and tighten screws
Guideline
Screw, handlebar clamp
. Take off the handlebar clamps. Remove the handlebar and
Info
Cover the components to protect them against damage.
Do not bend the cables and lines.
. Take off the handlebar supports.
.
M10
Info
Position the left and right handlebar supports evenly.
Info
Make sure the cables and wiring are positioned correctly.
Info
Make sure the gap width is even.
40 Nm
Loctite
®
(29.5 lbf ft)
evenly.
M8
20 Nm
(14.8 lbf ft)
50
243™