Adjusting The Basic Position Of The Shift Lever - KTM 500 EXC US Owner's Manual

17 TUNING THE ENGINE
17.5

Adjusting the basic position of the shift lever

–
Remove screw
401950-12
–
Clean gear teeth
–
Mount the shift lever on the shift shaft in the required position and engage the
gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle compo-
nents during the shift procedure.
–
Mount and tighten screw
401951-10
Guideline
Screw, shift lever

with the washers and remove the shift lever

of the shift lever and shift shaft.

with the washers.
M6

.
14 Nm Loctite ® 243™
(10.3 lbf ft)
103